📍 Digital Inputs (I)
🔴 Digital Outputs (Q)
📋 Memory Bits (M)
How to Use:
1. Click RUN to start simulation
2. Click Toggle on inputs to change state
3. Watch outputs react in real time
4. Green wire = powered (TRUE)
5. Grey wire = no power (FALSE)
Rung 1: Motor start/stop with seal
Rung 2: E-stop interlock
Rung 3: TON delay timer
Rung 4: Conveyor after timer
Rung 5: Alarm on fault
Rung 6: Counter status
1. Click RUN to start simulation
2. Click Toggle on inputs to change state
3. Watch outputs react in real time
4. Green wire = powered (TRUE)
5. Grey wire = no power (FALSE)
Rung 1: Motor start/stop with seal
Rung 2: E-stop interlock
Rung 3: TON delay timer
Rung 4: Conveyor after timer
Rung 5: Alarm on fault
Rung 6: Counter status
⎪ Ladder Logic Diagram — Motor Control System
Siemens S7 Style • 6 Rungs • Click RUN then toggle inputs
Contacts: ⎯| |⎯ = Normally Open (NO) | ⎯|/|⎯ = Normally Closed (NC) |
Coils: ⎯( )⎯ = Output Coil |
Hot wire = ■ GREEN • Cold wire = ■ GREY